Have a skirting job? Need to know what tools you should have? Here you go, Phil lists all the tools he uses during a mobile home metal skirting job.
00:00 Follow along with a handyman
00:25 What tools you need for skirting job
02:13 Be an American not an American’t
Hi, I’m Phil bridges, owner of Straight Arrow Repair. Ever want to know how a repairman fixes things? Well come with me, and I’ll show you how I solve problems. Let’s make things better together. Hey, you’re here. Guess what I am too, glad you came along.
What we’re doing today is putting a skirting up on a mobile home, it will end up being up to about here. But skirting itself somewhere. So I want to show you first what kind of tools you’re going to need and what supplies you’re going to need.
We have all the top front, corners, here is the top front corners will cut to length j-channel and then the panels are scattered around like so over there. This particular color is black, which is a little unusual, but it kind of blends with the black shutters.
Gray House white trim. So that’s what the plan is. Now, the other things are a pair of snips, I use straights, the hammer, four foot level. Screw gun with a quarter inch bit. The screws, these are color two the same colors and then the nails that we use to hold down the j-channel.
And then a tape measure, pencil, razor knife to open up the plastic if you have it wrapped in plastic. Usually, our supplier does that. So we’re going to show you we’re starting out pretty late, probably about three, and we’ll show you how much we can get done before it gets dark, which will be about 5:30 to 6 today. So see how much we can get done today. We’ll finish up tomorrow.
This is Phil Bridges, if you like what you saw and think it might be helpful to somebody else, push that like button and let other people know what you and I know, and we’ll work together toward making a brighter future. By the way, we’re not Amera-Can’ts We Americans see you next time