Updated 1-22-23
Need an alternative to vinyl skirting? Phil shows you how to use metal siding.
And here’s the link to the other video https://youtu.be/DtCr_DQsYWo
⏱️⏱️Chapters⏱️⏱️
00:00 Showing an alternative to vinyl skirting
00:30 Can use metal skirting-metal roof panels in place
01:00 Pull off the top front
01:20 Be careful in the cold, the vinyl will snap
01:45 Start measuring at the front, leave room for the top front will cover a lot
02:20 Start cutting your metal
03:30 Snap in the metal, make sure you’re level-screw it in
04:40 Want to lap over your next panel
05:00 Cutting out the air conditioner lines, cut your sheet
05:30 Want to cut with a razor knife near a rib
06:15 Cutting for lap over on metal skirting
07:00 Cutting the other side of skirting
07:55 Install metal skirting shows what they have completed
08:20 Shows exactly how to install around the AC
08:43 Putting the panel together
09:00 This makes it to where if someone needs to work on the area, just unscrew and go
09:15 Each panel is its own access port
09:40 Close up of the ribs-that’s your venting
10:40 Anywhere you have wires, things to go through just need to notch the top front
10:55 Want to use the muscle in the legs to snap in the top front
11:30 Difference in ground, that’s why you measure from a line behind the top front to the ground
11:55 The metal skirting is resistant to damage.
13:05 Great replacement for concrete board
13:35 Video he mentions https://youtu.be/DtCr_DQsYWo
🙏 Subscribe, 👍, it helps a lot!!
➤❓/ 💬: ask@straightarrowrepair.com
➤ Follow https://straightarrowrepair.com/pipf